Fire Door Remedial Works
Fire door repairs and remedial works across England. Send us your fire risk assessment or fire door inspection report and we'll quote the actual defects, then restore non-compliant doors to full fire safety standards.
Upload your report for a remedials quote or call 01522 775570.
Fire Door Repairs From Your Inspection Report
Not every non-compliant fire door needs replacing. Stark Contracts Ltd specialises in remedial works that restore existing fire doors to full compliance — saving you money while maintaining the highest safety standards.
Following a fire door inspection or fire risk assessment — ours or another company's — our BM TRADA certified team can carry out the recommended remedial works, from replacing worn intumescent strips and smoke seals to adjusting gaps, replacing ironmongery and installing compliant signage.
Every repair follows the original manufacturer's installation instructions. We only use components that match the fire test evidence for your specific door — this is what allows us to certify the work under our BM TRADA Q-Mark scheme.
Component-level remedials typically cost between £45 and £180 per door, excluding VAT, depending on the defects listed and the size of the programme. We work across England from our base in Lincoln (LN6 3JZ). Free site surveys are available within about 90 minutes of Lincoln; surveys further afield are arranged by agreement.
- Replacement of intumescent strips, smoke seals and fire-rated glazing
- Hinge, closer and lock replacement to meet current standards
- Gap adjustment and frame repairs for proper fire door performance
- Fire safety signage installation and replacement
- All work completed to BM TRADA Q-Mark standards
- Full documentation and certification on completion of remedial works
What We Can Repair & Certify
- Worn or missing intumescent strips — replaced like-for-like to manufacturer's specification
- Damaged or degraded smoke seals — fitted to match the original tested configuration
- Faulty self-closing devices — replaced with CE-marked closers of equivalent performance
- Non-compliant hinges — swapped for fire-rated alternatives per the manufacturer's data sheet
- Missing or incorrect signage — installed to BS 5499 / BS EN ISO 7010
- Minor gap adjustments — frame or leaf planed to restore 3mm tolerance
When Replacement Is Required
- Door leaf with damaged or compromised core — the fire-resisting core cannot be repaired, only replaced
- Frame warped beyond gap tolerance — if adjustment can't bring gaps to 3mm, full frame replacement is needed
- No traceable certification — if there's no plug, label, or evidence of fire test origin, we cannot certify it
- Modifications outside fire test evidence — adding glazing to a solid-tested door, or changing the door's dimensions
- Incorrect fire rating for the location — an FD30 door where FD60 is required by Building Regulations must be replaced
How Fire Door Remedial Works Are Completed
- Survey the door — A BM TRADA Q-Mark competent inspector records the door's certification, gap tolerance, seals, ironmongery and closer condition against BS 8214 with photographic evidence.
- Confirm what's repairable — Cross-check every defect against the manufacturer's test data. Seals, hinges, closers and signage are almost always repairable. Damaged cores, compromised frames or missing certification usually require replacement.
- Source matched components — Order like-for-like intumescent strips, smoke seals, hinges and CE-marked self-closing devices sourced from the original manufacturer or an equivalent tested to BS 476-22 / EN 1634.
- Complete the remedial works — Fit replacement components to the manufacturer's specification, restore 3mm gap tolerance where required, and install compliant BS 5499 / BS EN ISO 7010 signage.
- Certify and record — Photograph the completed works, update the digital record in the client portal and issue a BM TRADA Q-Mark completion certificate for the responsible person's fire safety file.
Who Needs Fire Door Remedials?
- Landlords and HMO operators acting on a fire risk assessment
- Housing associations following quarterly Fire Safety Regulations 2022 inspections
- Care homes, schools, hotels and student accommodation
- Commercial premises following a fire door survey
- Anyone handed a defects list by their fire risk assessor
Fire Door Remedial Works FAQs
Can you quote from an existing FRA or inspection report?
Yes. Upload the fire risk assessment or fire door inspection report on this page, or email it to Enquiries@starkcontracts.co.uk, and we'll prepare an itemised quote for the listed defects. Where the report doesn't give enough detail, we'll confirm on site before any work starts.
How quickly can you complete remedial works?
Most remedial defects (seals, ironmongery, signage, gap adjustments) can be completed in a single visit per door. Larger programmes across portfolios are scheduled phase-by-phase to minimise disruption.
Will the work invalidate my door's certification?
No — provided remedials follow the original test evidence. Every component we use is matched to the door's manufacturer data sheet and recorded with photo traceability under our BM TRADA Q-Mark scheme.
Can you remediate doors you didn't install?
Yes. The vast majority of our remedial work is on doors fitted by other contractors. We start with a survey to confirm what's certifiable and what genuinely needs replacement.
What if a door can't be repaired?
We'll tell you straight. If the door core, frame or test evidence won't support a compliant repair, we recommend replacement and quote a like-for-like FD30 or FD60 door set assembled in-house at our Lincoln workshop.
Do you carry out fire door remedials outside Lincolnshire?
Yes — we carry out fire door remedial works across England from our Lincoln workshop (LN6 3JZ), from Lincoln, Nottingham, Sheffield and Leicester to Birmingham, London and beyond.
How much do fire door remedial works cost?
Component-level remedials (intumescent strips, smoke seals, closers, signage, gap adjustments) typically fall between £45 and £180 per door, excluding VAT, depending on the works schedule and portfolio size. We quote from the inspection report so the price is tied to real defects, not a per-door blanket rate.
Can remedial works maintain the door's original BM TRADA certification?
Yes — provided every replacement component is matched to the manufacturer's original test evidence and installed to BS 8214. We record each component swap with photographic traceability under our BM TRADA Q-Mark scheme, so the door's certification chain stays intact and the responsible person has an evidence pack for their fire safety file.
Do you provide a completion certificate for fire door remedial works?
Yes — every Stark remedial job closes with a BM TRADA Q-Mark completion certificate covering the works performed, the components fitted (with batch numbers where applicable) and the door's compliance status against BS 8214. It's the same standard evidence pack an accredited fire risk assessor or building control officer will look for.
Related
- Fire Door Inspections
- Fire Door Installation
- Fire Risk Assessments
- Can a Fire Door Be Repaired?
- Fire Door Repair vs Replace: How to Decide
- Intumescent Strips & Cold Smoke Seals
Stark Contracts Ltd · Enquiries@starkcontracts.co.uk · 01522 775570