Fire Door Labels & Identification Plugs: How to Verify Certification

Fire Door Labels & Plugs — How to Verify a Fire Door is Certified

If a fire door has no certification marking, you cannot prove it's a fire door — and inspectors will record it as non-compliant. Here's how UK fire door identification works.

Where to Look

Certified fire doors carry one or more of the following:

  • Top-edge label — adhesive or branded label visible when the door is opened. Often the easiest to find
  • Hinge-edge label — fitted into a routed pocket on the lock or hinge edge
  • Identification plug — a small coloured disc set into the top edge, colour-coded by certifier and rating (e.g. BM TRADA, Certifire, BWF-Certifire)
  • Frame label — separate label confirming the frame's compatibility with the leaf
  • Glazing kitemark — etched into the corner of any vision panel

Common Certifiers in the UK

  • BM TRADA Q-Mark — one of the most widely recognised UK fire door certification schemes
  • Certifire (Warringtonfire) — third-party scheme covering doors and components
  • BWF-Certifire — joint British Woodworking Federation scheme
  • IFC Certification — fire door and ironmongery certification

Each certifier issues a unique reference that can be cross-checked against their public register.

What If a Label Is Missing?

Missing or damaged labels are a frequent finding on fire door surveys — see our common defects guide. Options include:

  1. Find the data sheet or installation certificate — if you can prove the door was installed as a certified set, the certifier may reissue a label
  2. Engage a competent inspector — some BM TRADA certified inspectors can recertify in-situ doors against current standards
  3. Replace the doorset — if no traceability exists, replacement is often the most pragmatic and cost-effective route

Don't Paint Over Labels

A painted-over label is treated the same as a missing one. See our painting and decorating guide for the rules.

Stark Contracts — Full Traceability

Every pre-hung doorset we assemble carries:

  • BM TRADA Q-Mark or BS 8214 certification
  • Top-edge label and ID plug
  • Glazing kitemarks where applicable
  • Component traceability documentation in our Customer Portal

Need fire doors certified and traceable? Call 01522 775570 or email Enquiries@Starkcontracts.co.uk.