The Most Common Fire Door Defects We Find During Inspections
The Most Common Fire Door Defects We Find
After conducting hundreds of fire door inspections across Lincoln, Lincolnshire and the East Midlands, we've identified the defects that appear most frequently.
1. Excessive Gaps (Found in 70%+ of inspections)
The most common defect by far. Gaps exceeding 4mm allow smoke and fire to penetrate. Often caused by building movement, poor original installation, or door warping.
2. Missing or Damaged Intumescent Strips (60%+)
Strips painted over, pulled out, or simply never installed. Without functioning intumescent strips, the door cannot seal the gap in a fire.
3. Defective Self-Closing Devices (55%+)
Closers that don't pull the door fully shut, missing closers, or closers held open with wedges. A fire door that doesn't close is just a door.
4. Incorrect or Missing Signage (50%+)
"Fire Door Keep Shut" signs missing or illegible. Required by law on all fire doors in communal areas.
5. Damaged Door Leaves (40%+)
Holes, cracks, and damage from everyday use that compromise the door's fire integrity.
6. Missing Certification Labels (35%+)
No way to verify the door's fire rating without a certification label or plug.
What Happens Next?
When we identify defects, we provide a prioritised remedial report. Many defects can be resolved through fire door remedial works without full door replacement — saving significant cost.
Book a fire door inspection across Lincolnshire — call 01522 775570.