Introducing DoorVision 3D — The UK's Only Real-Time Fire Door Configurator
A UK first
After three years of in-house development, Stark Contracts Ltd is the only UK fire door supplier to operate a real-time, browser-based 3D fire doorset configurator. We call it DoorVision 3D, and it lives on our pre-hung doorsets page. No download. No plugin. No Autodesk seat. Open the page, specify the set, watch it rebuild on screen in real time, capture the view, place the order.
No other UK fire door manufacturer offers this. The closest competitors offer two-dimensional product configurators, downloadable PDF schedule templates, or week-long sample-drawing services. None of them give the specifier a live, photoreal 3D rendering of the exact FD30 or FD60 pre-hung doorset they are about to order. DoorVision 3D does.
What DoorVision 3D renders
The configurator models every BM TRADA Q-Mark certified component of the doorset:
- Fire rating — FD30 or FD60, with the correct leaf thickness modelled to the manufacturer's specification.
- Leaf configuration — single or double leaf, with or without side panels, with or without fanlights, hung left or right.
- Veneer or paint finish — oak, walnut, sapele, ash and full RAL paint range, rendered with realistic grain and reflectance.
- Glazing — fire-rated vision panels in every standard size and position, with intumescent glazing tape behind the bead modelled to scale.
- Ironmongery — lever-on-rose or lever-on-backplate handles, escutcheons, lock cases, kickplates, closers, finger guards, drop-down seals, door viewers, letter plates and intumescent grilles, all rendered to scale.
- Architraves — square-edge, ovolo or ogee profile, pre-cut to length or marked for site cut.
- Smoke seals and intumescents — visible in the frame groove so you can see exactly which seal package the set is built with.
Every change updates the model in real time. The camera angle is yours to drive — orbit, zoom, tilt — and the captured view ships with the order so the workshop builds exactly what you approved.
Why we built it
Three years ago we sat down with our most demanding architect, BTR and NHS estates clients and asked them what was wrong with the fire door specification process. The answer was unanimous: "We can't see what we're ordering until it arrives on site."
The traditional doorset spec workflow is a paper exercise — a schedule line, a sample drawing two weeks later, a mark-up, a revision, a sign-off, a manufacture cycle, a delivery. By the time the sample arrives the design has moved on, and by the time the set arrives the spec has been re-interpreted by the workshop, the fitter and the client. The defect rate at first inspection on a typical fire door programme was running at 3–4% of sets — and most of those defects were specification mismatches, not workshop errors.
DoorVision 3D collapses the entire loop into the browser. The specifier sees the set, the workshop sees the same image, the client sees the same image, the inspector sees the same image. The defect rate on sets ordered through DoorVision 3D has dropped to under 0.5%.
Built in Lincoln, used UK-wide
DoorVision 3D was designed and built by Stark Contracts Ltd in our Lincoln workshop. It is wired directly into the same doorset assembly line that supplies our nationwide pre-hung doorset network — 25 cities across England within a 3-hour drive of Lincoln LN6 3JZ, including Manchester, Liverpool, Leeds, Bradford, Newcastle, London, Cambridge, Oxford, Reading and Norwich.
The captured 3D image is filed against the order reference, embedded in the workshop pick sheet, and archived against the Golden Thread building record. Specifier in Manchester, workshop in Lincoln, installer in any of our 90-minute radius cities — one image, one spec, one defensible audit trail.
The Building Safety Act case
The Building Safety Act 2022 requires the Responsible Person and the Accountable Person on higher-risk buildings to maintain a continuous, version-controlled record of building safety information — the Golden Thread. DoorVision 3D contributes to that record automatically. Every captured image is timestamped, tied to the order reference, archived against the workshop build log and the workshop's Q-Mark certificate, and stored against the building file.
When the Building Safety Regulator or the fire risk assessor asks "what was the specification of this flat-entrance door?", the answer is no longer a half-remembered schedule line. It is a rendered image, a workshop build log, a Q-Mark label and a photograph of the installed assembly — all tied to one order reference.
Try DoorVision 3D
DoorVision 3D is live now on our pre-hung doorsets page. No login, no email gate. Specify a representative set from your scheme, capture the view, send it to your team. If you want a guided walk-through with one of our specifiers, call 01522 775570 or email Enquiries@Starkcontracts.co.uk and we will screen-share through it in 15 minutes.
Further reading
- Pre-hung fire doorsets — main page and DoorVision 3D
- Inside DoorVision 3D — how the configurator works
- Why DoorVision 3D saves days on every fire door programme
- DoorVision 3D for architects and specifiers
- Nationwide pre-hung doorset supply
- Our full coverage map
Open DoorVision 3D. Specify a doorset in the browser — call 01522 775570 for a guided walk-through. The only real-time 3D fire door configurator in the UK, built in Lincoln by Stark Contracts Ltd.