5 Signs Your Fire Door Needs Replacing or Repairing
5 Signs Your Fire Door Needs Replacing or Repairing
Fire doors are life-safety devices — when they fail, people are at risk. Here are five warning signs that your fire doors need professional attention.
1. Visible Damage to the Door Leaf
Cracks, holes, dents or delamination can compromise the fire resistance of the door. Even minor surface damage should be assessed by a qualified inspector.
2. Excessive Gaps Around the Door
The gap between the door and frame should typically be 3mm ±1mm. Gaps larger than 4mm allow fire and smoke to pass through, defeating the door's purpose.
3. Missing or Damaged Intumescent Strips
Intumescent strips expand in heat to seal the gap between door and frame. If they're missing, painted over, or damaged, the door won't perform as certified.
4. The Door Doesn't Self-Close Properly
A fire door must close fully into its frame from any open position. If the self-closing device is weak, broken, or missing, the door is non-compliant.
5. No Certification Label
Fire doors should carry a certification label or plug on the top edge. If this is missing or illegible, it may be impossible to verify the door's fire rating.
What Should You Do?
If you spot any of these issues in your building in Lincoln, Nottingham, or across the East Midlands, contact a BM TRADA certified contractor immediately.
At Stark Contracts, we provide fire door remedial works that can often restore doors to compliance without full replacement — saving you time and money.
Call 01522 775570 or email Enquiries@Starkcontracts.co.uk for a free assessment.