Pre-Hung Fire Doorsets Delivered UK-Wide: A Programme Manager's Guide
Pre-hung doorsets, supplied UK-wide
A pre-hung fire doorset is the complete assembly — frame, leaf, three certified hinges, closer, intumescents, cold smoke seals and certified ironmongery — built and labelled in a controlled workshop environment, then delivered site-ready. The fitter on your site hangs the assembly. They do not build it from components on a dusty slab.
That distinction is the single biggest cause of installation defects in the UK fire door market. Most failed fire doors are not faulty — they are badly fitted. Build-up installs from loose components rely on the fitter to apply gap tolerances, intumescent positioning, hinge specification and closer setup correctly, on every door, every time. A pre-hung doorset removes that variability before the doorset leaves the workshop.
Stark Contracts Ltd supplies BM TRADA Q-Mark certified FD30 and FD60 pre-hung doorsets across England, delivered within a 3-hour drive of our Lincoln workshop (LN6 3JZ) — covering Manchester, Liverpool, Leeds, Bradford, Newcastle, Sunderland, Middlesbrough, London, Cambridge, Norwich, Ipswich, Coventry, Wolverhampton, Stoke-on-Trent, Telford, Northampton, Milton Keynes, Bedford, Luton, Stevenage, Reading, Oxford, Worcester and the surrounding regions.
Inspection & doorset supply only. Installation and remedial works are restricted to our 90-minute radius covering Lincolnshire, the East Midlands and Yorkshire. See our full coverage map.
What ships with every Stark pre-hung doorset
Each FD30 or FD60 set leaves the Lincoln workshop with:
- Frame — solid hardwood or veneered softwood, rebated, primed or finished as specified.
- Leaf — BM TRADA Q-Mark certified core, lipped on all four edges, factory-finished veneer or paint-grade.
- Three CE/UKCA marked fire-rated hinges with intumescent pads where required by the manufacturer's instructions.
- Self-closing device sized to the leaf weight and door function.
- Intumescent strips and cold smoke seals seated correctly in the frame groove.
- Certified ironmongery — lock, latch, lever set, escutcheons, all CE/UKCA marked for fire use.
- BM TRADA Q-Mark label applied in the workshop before despatch — the Golden Thread evidence the Responsible Person needs on file.
- Architraves supplied pre-cut to length on request (+£12 per set) or with line marks for site cut (+£6 per set).
Vision panels, letter plates and any other through-leaf hardware are factory-fitted with the correct fire-rated kit and the manufacturer's published intumescent treatments — never on site.
Why programme managers specify pre-hung
The case for pre-hung is operational as much as it is technical:
- 40–60% faster on-site versus build-up installs. A two-person team typically hangs 8–12 pre-hung sets per day; the same team building up from loose components manages 3–5.
- Predictable certification. Every set carries a Q-Mark label applied under audit conditions. There is no site judgement call about whether the components installed match the original certification.
- Cleaner snagging. Gap tolerances, hinge specification, intumescent seating and closer setup are all verified in the workshop. Site snags reduce to finishing items.
- One delivery, one POD, one batch reference. Crated by location and opening reference, labelled to your drawing schedule, tail-lift unloaded into agreed slots.
- Easier maintenance. A documented assembly with a Q-Mark label simplifies every future fire door inspection and reduces the chance of an inspector raising a "specification unknown" defect.
How a multi-site supply programme runs
For BTR developers, housing providers and main contractors managing several sites across the 3-hour delivery radius, we run supply programmes as follows:
- Specification (weeks 1–2). Door schedule loaded into our configurator — size, fire rating, finish, ironmongery, vision panels, architraves. Sample set delivered for sign-off where required.
- Workshop assembly (weeks 3–6). Sets manufactured against the agreed schedule. Q-Mark labels applied. Photographic record per opening reference held on file.
- Delivery (weeks 6–10). Crated by location and opening reference. Tail-lift unloads to agreed slots across all 25 cities within the 3-hour radius. Phased deliveries available to match the construction programme.
- Post-install support. Defect reports answered within two working days. Replacement components despatched from stock where the original Q-Mark spec is held on file.
Installation is not provided outside our 90-minute radius. For projects inside that radius — Lincolnshire, the East Midlands and Yorkshire — Stark's own fire door installation team hangs the sets we supply, under the same Q-Mark certification.
Lead times and pricing
Standard FD30 pre-hung sets typically lead 3–4 weeks from signed-off specification; FD60 sets 4–6 weeks. Premium veneers, oversized leaves and non-standard ironmongery extend the lead time and we will flag this at quotation. Pricing is per set and depends on size, fire rating, finish and ironmongery package. For a project-level quote covering several sites, call 01522 775570 or email Enquiries@Starkcontracts.co.uk.
Why Stark
- BM TRADA Q-Mark certified for both manufacture and inspection.
- Assembled in-house at our Lincolnshire workshop — no subcontracted assembly, no anonymous import chain.
- Constructionline Gold and ISO 9001 accredited.
- 75+ verified Google reviews (4.9★) and award-winning local installer of the year.
- Delivered site-ready across 25 cities within a 3-hour drive of Lincoln LN6 3JZ.
Further reading
- Nationwide Pre-Hung Doorset Supply — service page
- Nationwide Fire Door Inspections
- Pre-hung fire doorsets — configurator and detail
- Fire door installation
- Fire door inspections
- Our full coverage map
Specify your FD30 or FD60 doorset. Call 01522 775570, email Enquiries@Starkcontracts.co.uk, or open the configurator. One BM TRADA certified contractor, one Q-Mark labelled assembly — delivered from Newcastle to Reading.