How Much Does a Fire Door Cost in the UK? (2026 Price Guide)

The honest answer first

"How much does a fire door cost?" is the single most-googled fire door question in the UK — and most online answers are misleading because they price the leaf only and ignore everything that actually makes the door compliant: the certified frame, intumescent strips, smoke seals, three CE/UKCA-marked hinges, a tested closer, signage and a labelled installation.

For a realistic 2026 budget in the UK, expect:

  • FD30 leaf only (uncertified blank): £140–£240
  • FD30 certified leaf with cert label: £220–£380
  • FD30 pre-hung doorset, supply only (leaf, frame, intumescents, smoke seals, hinges, closer, latch, signage, Q-Mark label): £480–£780
  • FD30 pre-hung doorset, supplied and fitted in a typical UK property: £720–£1,150
  • FD60 pre-hung doorset, supply only: £620–£980
  • FD60 pre-hung doorset, supplied and fitted: £900–£1,450

Volume, finish, glazing, ironmongery upgrades and access all move the figure. Heritage matching, paint-grade vs veneer, postformed laminates, locks to BS 3621, electric strikes and acoustic ratings all add cost — but the brackets above cover most flat-entrance, communal-corridor and commercial doors in the UK.

Why the leaf-only price is a trap

A bare fire door leaf without the matching frame and ironmongery is not a fire door. BS 8214:2026 and the Regulatory Reform (Fire Safety) Order 2005 treat the doorset as a system: leaf + frame + seals + hinges + closer + latch, all installed to the manufacturer's certified instructions.

Buy a £180 leaf, drop it into an old softwood frame with the original hinges and an off-the-shelf closer, and you've spent £180 to install something that will fail an inspection on day one and offers no defensible evidence in a fire investigation. The "cheap" door is usually the most expensive mistake on the building.

What drives the price

  • Certification level — Q-Mark labelled and traceable always costs more than a generic CE-marked blank, and is the only spec most insurers and assessors will accept post-Grenfell.
  • Frame — softwood, hardwood, MDF-wrapped or steel. Heritage profiles, double-rebates and stop heights all add cost.
  • Glazing — a Pyroguard or Pilkington Pyrostop vision panel typically adds £180–£420 per door.
  • Ironmongery — three certified hinges, a BS EN 1154 closer, a fire-rated mortice latch and a thumb-turn add ~£140–£260 per door.
  • Finish — paint-grade primed is cheapest; oak/walnut/sapele veneers and bespoke RAL paint finishes cost more.
  • Access and programme — occupied tower blocks, weekend work, scaffold access and out-of-hours installs all add labour.

Pre-hung vs build-up — the cost angle

A pre-hung doorset arrives on site as a single labelled assembly. Build-up means the installer cuts the leaf, mortices the frame, fits the hinges, planes the gaps and applies the seals on site. Build-up is typically £80–£140 cheaper per door in materials, but adds 60–90 minutes per opening in labour and is the single biggest source of inspection failures: gap tolerances out of spec, intumescents fouled with paint, screws too short, frame fixings missing.

On any programme over five doors, pre-hung is almost always cheaper once labour, snagging and re-visits are counted. On occupied buildings the difference is bigger because the access window matters more than the material cost.

Inspection and remedial costs

Compliance is not just the install. Budget for:

  • Inspection: pricing is quoted to scope for both inspection contracts and one-off visits. Contact us for a quote and booking.
  • Remedial works: replacing seals, hinges, closers, signage on an existing door usually £80–£220 per door depending on what's failed.
  • FRA Type 1–4 reports: from £350 for a small block — see fire risk assessments.

What Stark actually charges

Our pre-hung doorset prices are published online with live delivery quotes by postcode. Our inspection pricing is published per door, with subscription tiers for portfolios.

For a project price, call 01522 775570 or book a free survey — we'll measure on site, price the full doorset and confirm a lead time on the same visit.