Fire Door Traceability: Why Every Component Must Be Certified
Fire Door Traceability: Why Every Component Must Be Certified
Here's a fact that surprises many building managers: a fire door is not just a door. It's a complete assembly — and every single component in that assembly must be traceable to valid fire test evidence. If one component can't be traced, the entire door's certification is potentially invalid.
What Is Traceability?
Traceability means that every component used in a fire door assembly can be linked back to a specific fire test that proves the complete assembly (including that component) achieved its rated fire resistance.
This applies to every single part:
| Component | Traceability Required | |---|---| | Door blank (leaf) | Must be from a tested and certified manufacturer | | Door frame | Must match the frame used in the fire test | | Intumescent strips | Must be the specific product tested with that door | | Smoke seals | Must match the test specification | | Hinges | Must be the same type, size, and material as tested | | Self-closing device | Must be compatible and tested with the door | | Lock/latch | Must be fire-rated and tested in combination | | Handles | Must be tested as part of the assembly | | Glazing (if present) | Must be fire-rated glass with correct beading system | | Letter plate (if present) | Must be fire-rated and tested in combination | | Viewer/spyhole (if present) | Must be fire-rated | | Signage fixings | Must not compromise the door's integrity |
Why This Matters
In a fire test, the entire assembly is tested as a complete unit. The test proves that this specific combination of components achieves 30 or 60 minutes of fire resistance.
If you swap out the hinges for a different brand, fit a different intumescent strip, or use glazing beads from a different supplier — the test evidence no longer applies to your door.
The "Field of Application" Problem
Fire door manufacturers publish a "field of application" (also called "scope of application") document alongside their test evidence. This specifies exactly which components can be used with their door blank while maintaining certification.
Problems arise when:
- An installer uses ironmongery not listed in the field of application
- A maintenance team replaces components with "equivalent" products that haven't been tested together
- A locksmith fits a non-fire-rated lock
- A glazier replaces glass without checking fire rating requirements
Real-World Examples We've Found
During our inspections across Lincolnshire and the East Midlands, we regularly find:
1. Mismatched intumescent strips A door blank from Manufacturer A fitted with intumescent strips designed for Manufacturer B's doors. The strips may look identical but haven't been tested with that specific door — meaning there's no evidence they'll perform in a fire.
2. Non-fire-rated ironmongery Standard domestic-grade handles and locks fitted to fire doors. These may melt, deform, or fail in a fire, allowing the door to swing open.
3. Replaced glazing without certification Fire-rated glass replaced with standard toughened glass during renovation. The glass may shatter in under 5 minutes, creating a hole in the fire barrier.
4. Aftermarket letter plates Standard letter plates cut into fire doors without fire-rated intumescent letter plate protectors. This creates a direct path for fire and smoke.
5. Missing certification labels The certification label has been painted over, removed, or was never applied — making it impossible to verify what the door is and what components are compatible.
The Legal Position
Under the Building Safety Act 2022 and the concept of the "golden thread", building owners must maintain:
- Records of every fire door installed
- Evidence of the door's certification
- Documentation linking every component to test evidence
- Records of any replacements or modifications
If a fire occurs and a door fails, investigators will check whether every component was traceable. If it wasn't, the Responsible Person could face criminal liability.
How Stark Contracts Ensures Full Traceability
Our approach to traceability is rigorous:
- Certified door blanks — we only use door blanks from BM TRADA Q-Mark certified manufacturers
- Matched components — every intumescent strip, seal, hinge, closer, and lock is sourced from within the manufacturer's field of application
- Workshop assembly — our pre-hung door sets are assembled in controlled conditions, not on a busy construction site
- Documentation — every door set we supply includes a full component schedule linking every part to its test evidence
- Digital records — available through our Customer Portal for ongoing compliance management
What Building Managers Should Do
- Audit your existing fire doors — check whether certification labels are present and legible
- Never allow ad-hoc component swaps — any replacement must be verified against the field of application
- Use certified contractors — BM TRADA Q-Mark certified installers maintain traceability as standard
- Keep records — store all certificates, data sheets, and component schedules for the life of the building
Concerned about traceability in your building? Book a fire door audit — call 01522 775570.