Choosing a Fire Door Supplier or Manufacturer in the UK
The cheapest quote is almost never the cheapest job
Fire door quotations rarely compare like for like. One supplier prices a certified doorset — leaf, frame, seals, ironmongery preparation and evidence. Another prices a bare blank that still needs a frame, machining, seals and hardware, all of which have to be done in a way the certification allows.
By the time the second option is compliant, it is usually the dearer one. This guide sets out how to judge a fire door supplier properly.
Question 1: are you supplying a leaf or a doorset?
This is the single most useful question. A doorset is tested and certified as a complete assembly. A leaf is one component; its rating depends entirely on what it is fitted into and how.
Supplying doorsets shifts the certification burden onto the manufacturer, which is exactly where it should sit. It also removes most of the site machining that causes inspection failures later.
Question 2: can I see the certification and its field of application?
Ask for the actual certificate, not a logo on a brochure. Then check three things:
| Check | Why it matters | | --- | --- | | Scope | Does it cover the size, rating and configuration you are ordering? | | Field of application | Does it permit your ironmongery, glazing and hardware positions? | | Currency | Is the certificate in date and issued to the company quoting you? |
A supplier who cannot produce a field of application document is asking you to take the rating on trust.
Question 3: who is responsible if it fails an inspection?
Split responsibility is where fire door projects come apart. If a manufacturer supplies, a joiner fits and a third party inspects, a defect becomes an argument. Single-point responsibility — survey, supply, install and certify — removes that.
Question 4: what evidence comes with the delivery?
At minimum you should receive:
- Certification and field of application for the doorset
- A schedule tying each door number to a specification
- Ironmongery certification, including hinges, closers and locks
- Installation instructions the fitter is required to follow
- Handover documentation suitable for the golden thread on relevant buildings
Question 5: realistic lead times
Certified doorsets are made to order. Standard configurations are typically two to four weeks; premium veneers, glazing and non-standard sizes run longer. Any supplier promising a certified bespoke doorset "off the shelf tomorrow" is either holding stock in one size or is not supplying what you asked for.
Merchant stock vs certified supply
National merchants sell fire door blanks, and they have their place — but they are sold as leaves, not doorsets, and the compliance responsibility passes to whoever fits them. For regulated buildings, that is a risk most responsible persons should not take.
What Stark supplies
We assemble pre-hung FD30 and FD60 doorsets in-house with certified ironmongery, deliver them ready to fit, and can install and certify them ourselves. One contractor, one certificate chain, one point of accountability.
Call 01522 775570 or email Enquiries@Starkcontracts.co.uk for a schedule-based quotation.